How To Fix Earbuds that Work On One Side?

Problem with one side of your earbuds not working? This guide walks you to answer the question How To Fix Earbuds that Work On One Side? and some potential fixes so you can get back to listening to your music or podcasts in no time.

Whether the issue is a loose connection, the sound coming out of only one ear, or experiencing distortion, we’ll help you troubleshoot and hopefully resolve the problem.

Keep in mind that these solutions are not guaranteed to work for everyone, but they’re worth a try if you’re at a loss!

Steps To Fix Earbuds that Work On One Side:

Step 1:

Check the volume level of the music coming from your headphones. Remember that sound is measured in decibels (dB).

The range for normal volume is from 80 dB to 85 dB. A volume higher than this could cause damage to your hearing as well as the headphone’s speaker or wiring.

Turn down the volume on your headphones and listen for a short while to see if the problem goes away.

Step 2:

Inspect each earbud/the 3.5mm plug going into your iPhone, iPod, iPad, etc. It may not be a bad connection at all!

Look closely at both connectors to make sure that they’re clean and free of debris such as lint, dirt, pocket grime, etc., which can prevent them from making proper contact with each other. You can use a dry cloth to clean them off.

Step 3:

Try turning your device’s volume down and see if you get the same problem when the volume is lowered.

If only one side of your earbud doesn’t work with the volume set at zero, then it could be just an electrical issue in that particular earbud/speaker where sound isn’t coming through properly.

It may still be covered under warranty so contact your manufacturer for more information about this situation.

Also Read: Top 3 Best Earbuds Under 10000 

Step 4:

Turn off any noise cancellation or echo cancellation built into your headphones if this is available in your model of headphones.

This feature creates extra electronic signals which might interfere with expected signals sent by iOS devices, so disabling it should allow the music to play in both earbuds.

Step 5:

Change where you’re holding your iOS device while listening to music and see if the problem moves with it.

If you hold your device in a way that covers or blocks either earbud, sound may not be able to travel properly and cause one earbud not to work very well.

Experiment with different orientations and positions of your phone/iPad etc., as well as try walking around for a better idea of what gives the best sound quality.

Step 6:

Sometimes just turning down the volume and then back up again will fix this type of problem.

Don’t keep your headphones set at maximum volume all day long! It can damage your hearing and degrade speaker performance over time.

Lower the volume and try again to see if you get a sound from both ears now. If so, simply repeat this process as needed until the problem is resolved.

Step 7:

Try plugging your headphones into a different iOS device or music player just to make sure that it isn’t a specific piece of hardware causing the issue!

Again, this is not guaranteed to work for everyone but give it a shot anyway just to be sure. It well could be an iOS compatibility issue with your particular phone/tablet etc., which would make more sense out of why only one earbud is working instead of both sides!

The same goes for using different devices since all iPod/iPhone models are not made the same way nor do they have the same software.

Check Out: Top 5 Best True Wireless Earbuds Under 3000

Step 8:

If you’re using a 3.5mm to 2.5mm adapter, make sure that it is properly plugged into your headphones and your device.

The smaller 2.5mm plug is not as common as 3.5mm so this might be why you’re having trouble getting both earbuds to work at the same time.

Double-check the connection and try again.

Step 9:

Last but not least, contact the manufacturer of your headphones if none of these tips help resolve the issue.

They may have some advice or a fix for this problem that you haven’t tried yet. It could be something as simple as needing new ear tips or foam covers, so don’t hesitate to reach out for assistance.

Some Other Tips:

If these steps didn’t work for you, then you can also try some different earphones and Bluetooth.


Hopefully at least one of these tips resolves the problem with your earbuds not working properly on one side. If it’s still not working after trying everything, then it might be time to invest in a new pair! Thanks for reading.

Do you have any additional tips or tricks that have worked for you when one side of your earbuds isn’t working? Let us know in the comments below and we might add them to this guide!

Leave a Comment